이 놈 재미있네요..
페이지 정보
작성일15-06-03 07:37 968읽음본문
출처 : http://www.vapordna.com/Talos-Mod-by-Cigreen-p/tacg00.htm
(아 절연체로 델린 썼으니까, 어느 님 말대로 시대에 뒤쳐지는 기기가 되겠네요. 출시하자 마자 망했네!)
Talos Mod by Cigreen is a 26650-styled full mechanical mod that allows you to store your juice in your device!
The Talos Mod by Cigreen is a 26650 styled stainless steel mod that uses a 18650 battery and brings new innovation to the table. The Talos Mod introduces a new method to help saturate your wicking material by adding a polycarbonate tank around an 18650 tube that holds a whopping 12mL of juice. To help avoid over-saturating, the Talos Mod has an "on and off" switch right below the mod's deck, that when switched to "on," it allows juice to flow to your wicking material. When your wicking material is saturated, you simply switch to "off," and it closes the juice flow. The firing switch on the Talos Mod is a very smooth throw switch which includes a magnet for smooth firing action. The switch also includes a copper contact for optimal conductivity. The build deck is integrated to the mod and features a large and deep juice well and a removal plate that features the negative posts that are milled into the design and a delrin-insulated square dual split positive post. The positive contact is silver-plated copper and it extends to a large copper contact that makes contact with the copper contact on the removal build plate for minimal voltage drop. The barrel of the top cap features six 5mm by 2 mm airflow holes with three on each side and the top cap features air flow control for a variety of airflow options. The Talos Mod is topped off with a 11mm wide bore delrin drip tip. The Talos Mod also features beautiful laurel engravings on the switch and barrel, a Cigreen emblem on the switch, and serial number for a personal touch. The Talos Mod by Cigreen, innovation and ingenuity.
Product Features:
- 12mL juice storage with "on" and "off" switch
- Copper contacts and silver-plated positive contact
- Magnetic switch
- Multiple airflow options
- Integrated deck with removable build plate
- 18650 mod in a 26650 body
- 11mm wide bore delrin drip tip
추천 0
댓글 13건
콩쥐야놀자님의 댓글
|
|
뭔가 신기하기도 하면서도 저는 봐도 모르겠네요 ^^; |
수폭님의 댓글
|
|
|
채기락님의 댓글
|
|
@수폭오 제 취향까지 ㅋㅋㅋㅋ
650배터리라 액상보다 배터리가 더 빨리 닳겠네요. |
채기락님의 댓글
|
|
@콩쥐야놀자일체형 모드+드리퍼인데
모드기 옆으로 액상저장 탱크를 넣어서, 바텀피드처럼 드리퍼를 적실 수 있는 구조로 만들어진 아이디어 상품(?)입니다 ㅋㅋ 덕분에 굵기가 26650사이즈 모드기가 됩니다. |
수폭님의 댓글
|
|
|
여너사랑님의 댓글
|
|
신기방기하네요.ㅋㅋ |
현뽐님의 댓글
|
|
이건...빌렛 확대해놓은거 같아요~ㅎ |
채기락님의 댓글
|
|
@수폭ㅋㅋㅋ
바닐라, 시나몬 등등 먹지 말라는 거죠! |
콩쥐야놀자님의 댓글
|
|
@채기락아하 그렇군요 액상 저장 공간은 어마어마 하군요.
바텀피드 종류는 써보질 않아서 궁금하긴 하면서도 사이즈에..ㄷㄷ 뽐이 죽네요 +_+; |
사르가르님의 댓글
|
|
12ml라니...용량은 최강이네요 ㅋㅋ |
테디님의 댓글
|
|
저거하나만 챙겨나가면 하루종일 리필 걱정안해도 될듯해요 ^^ |
세타님의 댓글
|
|
까주세요 +_+ ㅋㅋㅋㅋㅋㅋㅋㅋ |
dixie님의 댓글
|
|
그렇네요. 폴리카보네이트 경통과 덜린 절연체, 딱 수준에 어울리는 소재들이군요. |
